Completed Poxwalker Mob!

Let the plague bells ring!  Friends, I have at long last closed the books on my mob of twenty Dark Imperium poxwalkers with this round-up.  I started putting the wretches together in June 2017, when the boxed set came out, and now we come full circle to June 2020.  What a long, disease-ridden road (punctuated with both apathy and frenzied activity) it has been!

Twenty Poxwalkers June 10 2020

For the Grandfather!

My Dark Imperium poxwalker posts for this mob:

Although it took me three years to get the full mob painted, my poxwalkers have certainly distinguished themselves in battle, along with their running mates the plaguebearers, especially during that fruitful time of mid-2017 through 2018, when I was playing games of Warhammer 40K almost every week.

I’ve built up a pretty decent-sized force of minor Nurgle troops thus far.  Twenty plaguebearers with a couple of minor leader types, the poxwalkers (of course) and let’s not forget the semi-official mascots including Toad, Rusty the rust monster, and the bit box skeletal snake thingie.

So what’s next Nurgle-wise?  I have no shortage of projects to choose from, but the one that shines turgidly forth burbling out to be kicked back to the top of the painting heap is my long suffering daemon engine, Becky the Bloat Drone.  She has been abandoned not once but twice and maybe even thrice, though I’ve lost track so I am not sure about that.  We’ll have to see what we can do to remedy the situation once Frank’s Pig Demon is done.

Becky the Bloater WIP Ink Sketch 400 wide

Being a daemon engine ain’t easy.

Until next time, qapla’ and …

Paint On keeping fighting guy

 

Commissar Poxwalker #19 Completed

I finished Commissar Poxwalker #19 here before its counterpart, Khorne Flower Poxwalker #20, who is also a commissar, as chance would have it.*  The picture-taking got a little out of order but I’ve gotten that all sorted and can now present this (not quite) latest addition to my foetid forces.

Poxwalker #19 Front view June 9 2020
There wasn’t a lot of blister and pox highlighting to be done on this one, because of the greatcoat, so I thought I’d go for a fairly mild case of yellow mold.**  This time I was careful to spread the texture paste without pulling away the paste too much with my sculpting tool.  I wasn’t going for a bunch of little spiky bits like I got on my poxbringer’s arm.

I forget how I painted the mold this time, but it looks like I used some bright green, followed by bright yellow and then a glaze from maybe Waywatcher Green or perhaps Biel-Tan Green with a little satin finish.  I’ll have to try this again and write down what I did next time so I don’t forget in the time between completing the model and typing up a blog post.

Poxwalker #19 rear view June 9 2020

I did the dorsal tentacles and left arm with Flesh Tearers Red Contrast and Nuln Oil Gloss, then brightened them up with some thinned down Blood Angels Red Contrast followed by Evil Sun Scarlet.  I used Basilicanum Grey Contrast to emphasize the separations between the tentacles.  I find using contrast paint in this way easier than using washes because the former don’t flow all over the place so one can be a bit more targeted.

I’ve been having fun lately doing a little post-production with my pictures.***  So we’ll wrap up Commissar Poxwalker’s moment in the Verdigris Sun with a few of these sort of offerings.  Don’t mind Bits Box Skeletal Snake Thingie; I think it has spent so many years entombed in the sepulchral darkness of the game store bits box that it grabs any chance for attention it can get.  Truly, it is incredibly needy for a mindless undead.****
  

So that is it for this penultimate poxwalker post.  I’ll do one more of the whole crew and put paid to this playful party of putrescent perambulators.  I’m continuing to work on Frank’s Pig Demon, which I hope to have done before the end of June, since that is my planned offering for the Miniatures of Magnitude Painting Challenge.

Take care all.

Red Biohard clip art with circle around it 100 wide

* Or possesses the greatcoat of a commissar, which can be much the same thing at times.

** I had a bit of a chuckle reading what my poxbringer had to say about yellow mold almost two years ago now.  I had completely forgotten about our little chat.

*** If this continues I might have to break down and learn how to use Photoshop versus just fiddling around with the little paint program I’m currently fumbling around with.

**** For instance, Skeletal Snake is constantly reminding me that it “never got its own blog post and just got stuck in with some badly-painted poxwalkers like 30 years ago.”  Even though I’ve promised to use it in a D&D game someday and have given this pestiferous haunt a place as a token/marker/mascot in my forces, I still have to put up with its whining.  This is surely not what I expected when I began perusing forbidden tomes and conducting vile painting experiments.  Oh well, now it’s got me whining too.  Such is the hard life of a Necromantrix!

Poxwalker #20 (with a Khorne Flower?)

So I’m seeing the light at the end of purulent tunnel, as it were, poxwalker-wise with this latest offering.  I had plans to go with a similar orange type flesh that I was so pleased with on the last one, but as seems to so often be the case with my diseased quasi-zombies when I do have a plan it seldom comes off as planned.

Poxwalker #20 Front dark view

I had a little extra green stuff on hand (I’m guessing) the year or two ago when I glopped a candle onto its horn.  For once I wasn’t trying to hide a broken off tip, which seems to have become pretty common for me over the last few years.*  Perhaps I need to ease off a point or two on the Slaanesh-based energy drinks that cause my hands to shake and roil (temporarily) with sneering finger tentacles?

The candle itself was easy enough to paint.  White primer, sepia wash, off-white layer and then a bit of brighter white toward the top near the flame.  For the flame, I used the recipe from White Dwarf #57 (February 2015) entitled “Khorne’s Wrath.”  Overall I’m pleased but I do think I’ll be more careful with the Nuln Oil next time.  I’m happy with how the flame looks from the back but less so from the front.  I made several unsuccessful attempts to make myself happier with the front of the flame before finally giving up before I made things worse since I didn’t want to  have to go over the flame with Ceramite White and do it over again.

Poxwalker #20 Rear dark view

Using a recipe from a publication dedicated to Khorne is probably where I went wrong, and I should have been on my guard when I went for orange flesh and ended up with red.**  Well, I had put some green stuff on my poxwalker’s shoulder with the idea of it looking like wax that had dripped down from its horn candle.  Seemed like a good idea at the time but I wasn’t satisfied with how I executed it.  So I thought of trying something a little different and busted out my jar of Golden’s fiber paste.

I started out with the idea of creating some textured flesh or perhaps a slightly sticky or spiky area like the yellow mold on my poxbringer.  Imagine my surprise when I slapped on some of this paste, drew it out a bit with my sculpting tool and ended up with what you see below!

I let my creation dry overnight, closed my eyes and wondered on the festering mysteries of the Grandfather’s Garden.  The next day, when I was brushing some primer on this new doodad, a voice screeched in my mind.  It resonated somewhere between a broken concertina and claws rasping over a blackboard.  How charming.

“‘Nurgle?  Nurgle!  Vile mortal, you have decapitated a bud from the sanguine Hothouse of Khorne!  You are without a doubt both stupid, ugly, and a stinking fleshbag whose crumbling, rotted skull is not fit for Khorne’s cesspit much less His Throne!”

“Isn’t that three things, young demon?”

“SSSSSCCCCCREEEEEEEEEEE!!!!!!!!”

“SCREEE!”

“Get not thine nether regions in a complete twist young firebrand, for as the Burning Books sayeth, ‘He cares not from whence the sap flows so long that it flows!'” I countered.  It all went downhill from there as it so often does when treating with the Ruinous Powers.  C’est la vie.

Poxwalker #20 Vignette Portrait

Hope I got Commissar Poxwalker’s best side.

Anyway, some sharp-eyed reader might be wondering how in Tzeentch’s name we went from poxwalker #18 to poxwalker #20.  Well, I did get #19 done, but I’m not happy with the pictures I took so I’m going to take more over the weekend and will post them soon.  It’ll be happy times indeed when I do for then and only then will I be able to close the books on my Dark Imperium poxwalkers, which I started so long ago now.***

khorne20bullet20point20graphic2002_zpsh7cfhuus

* There was the broken tip that I turned into a tentacle spike on poxwalker #18.  Then there was the plaguebearer with a banner, and of course who can forget Maggotmouth’s nameless friend (from early 2018) whose broken horn I ended up sharpening like a pencil?

** On the other hand, I’m sure this guy and these people approve!

*** June 2017.

April 2020 “Paint the Crap You Already Own!” Painting Challenge Round-up (Part 2 of 2)

Welcome to second half of the April 2020 Paint the Crap You Already Own! painting challenge.  Part One of this painting challenge round-up can be found here.

John at Just Needs Varnish French HQ looking at map small filler art ink sketch effect

Yes, here!

First up is John’s Franco-Prussian War marching Prussian infantry, currently on parade from Just Needs Varnish!.  John mentioned that this “marching unit is a bit different from the others I’ve painted.”  He makes a good point.  Now that I think about it, I haven’t seen many marching units like this one either on the tabletop.  Plenty of units at attention or in action, of course, but not marching.

These figures are from “the Emhar plastic 1:72 FPW Prussian Infantry set,” and the officer is “a metal figure from Hagen Miniatures.”

John at Just Needs Varnish Marching Prussian Infantry

Looking good but that private in the back and fourth in from the left needs to get back in step!

John mentions that the “Prussian coats are described as black-grey,” and thus are lighter than the real thing.  You can read more about what he has to say on the issue here if you’d like.  Whatever the case, I think they would look good.

He also painted some Prussian field artillery to go along with his infantry.  All of the figures in the gun battery below “are from the B&B Miniatures 20mm FPW range.”  In games, when the gun is being moved, John places it on the lengthened base “behind its limber.”

John at Just Needs Varnish Prussian field gun with crew and limber

I like how that one wheel is sunk a little into the mud.  (Vallejo Flat Brown for the horses.)

Below we have a French Mitrailleuse team.  John reports that “In English, Mitrailleuse is the name given to the first machine gun in French service in the Franco-Prussian War, the Reffy Mitrailleuse.”  John also has a couple of interesting videos showing how the Montigny (1863) and Reffy (1867) versions of the Mitrailleuse operated.

John at Just Needs Varnish French Mitrailleuse Team

French mitrailleuse (machine gun) team.  John says this looks more like the Montigny version.

The story behind this Headquarters base of a “French senior officer conferring with one of his aides,” gave me quite a chuckle when John wrote the officer was “wondering why he hasn’t got a map of France.”  Apparently the French expected that they would be invading Germany and consequently didn’t have maps of France.  Turns out the Prussians had “tourist maps of France” aplenty.  Either way doesn’t exactly sound ideal!

John at Just Needs Varnish French HQ looking at map

Face it, monsieur, we’re lost … again!

Dave of Faith&Steel is working on increasing his Chinese Bolt Action forces and toward that worthy end completed a GAZ jeep.  The model is produced by Warlord Games.  I had never heard of these vehicles before so I poked around and learned there were several versions.  (At first glance I thought it was one of these but the nose and fenders were wrong.)  I asked Dave which version he thought his miniature was and he believed it was a GAZ-67B.

Faith and Steel GAZ Jeep front view

Snazzy sunglasses!

According to Wikipedia, “GAZ” stands for Gorkovsky Avtomobilny Zavod, which translates to Gorky Automobile Plant.  The GAZ-64 was developed “during the 1940 war between the Soviet Union and Finland,” and used “commerically available parts already available in the Soviet Union.”

Improvements made to the GAZ-67 over the earlier GAZ-64 included, among other things, a stronger frame, wider wheel base and greater fuel capacity.  This newer version was first produced in September 1943 with the B-series entering production as a replacement in January 1944.

Many people paint Blood Bowl players/combatants, but this month Dave from Scent of a Gamer presents something for the teams to fight over:  four trophies!  They are good sized as trophies go and to illustrate this Dave includes a couple of players for scale.

Scent of a Gamer Blood Blowl Trophies

See pictures below for each trophy’s title.

The trophies have some fun lore associated with them.  When I asked David about it he wrote that each of these trophies is awarded for a separate, major contest with the Blood Bowl being “the richest tournament which awards players a finalist medal.”  My favorite is the Chaos Cup (obviously) because of the “special interest” the Chaos Gods take in the tournament, resulting in random mutations and the like, as well as innovations such as prize money being determined randomly.  (“Yes, Gruncher, we only took second place but we got ALL the money!”)

David “decided to stick as close as possible to the original art in the 1993 Blood Bowl box.”  The pictures below show each trophy next to their original art.  I think he did a good job with that and a nice job painting them as well.

Maenoferren22 of Bogenwald worked on cavalry again this month but this time instead of Lustria he rides into Japan, possibly during (by the looks of things) the Sengoku period, which was a long period of civil war.

I always wondered about those flags on their backs or sashimono.  They look pretty cool in those old movies I used to watch many years ago (back when James Clavell’s novel, Shogun was popular) and I always assumed they had to do with identification and unit cohesion.  Turns out I wasn’t far wrong.

Bogenwald Samurai Cavalry

Plus they also provide aspiring tabletop shoguns scope for painting because Maenoferren22 wrote that he spent a fair amount of time painting the mon (emblems) on the sashimono and he had to 3D print them separately as well.  With posts such as I Hate Sashimono,” and Maeno’s general sashimono-based efforts here and here, it is a good thing they add a lot of color and interest to miniatures as well as fun to old timey war movies because otherwise I’d have to say there were an awful lot of trouble.  Fortunately it turns out they are worth it.

Maeno’s force certainly is colorful and there are quite a lot of them now.  They’ll present quite a spectacle and instill the requisite awe and fear in his enemy’s hearts on the battlefield.

Bogenwald Japanese Force

Argentbadger of The Bovine Overlord continues to expand his painted Warmachine collection and this month he has painted Anastasia Di Bray of the Mercenaries faction.  Argent reports that she is “basically a spy in the stories and her game rules involve ambush deployment and a highly amusing (if hard to pull off) special rule,” that seems to involve creeping up to the enemy warcaster/leader-type such that her forces can take advantage of the distraction to move into “punch them to death” range.

This seems a highly desirable thing to do and I have to say that I’d make sure Anastasia (or anyone else who could pull off a plan like that) got paid on time and was happy with her mercenary contract.  Wouldn’t want to look up one day and find out the hard way she’d gone over to the enemy!

Argent used “dark, naturalistic colours” for this miniature because it fit into the idea of Anastasia being sneaky.  He also pointed out that he liked the “fairly old” and “understated” pose versus the probable newer sculpt that would have her “balanced precariously on a rock throwing knives around like confetti.”  I agree and think that companies often overdo this, especially with rank-and-file types.  Heck, even though I don’t play Warmachine I find myself wanting this miniature because I think it would be useful for Dungeons & Dragons and other games.

Wudugast of Convert or Die! apparently has a love-hate relationship with the Adeptus Mechanicus.  Here we have two Skitarii rangers, one of which he started years ago, abandoned the project, then finished him for the challenge; the other he recently knocked out in about ninety minutes.

Convert or Die Two Skitarii Rangers

Can you tell which is which?  I think they both look great.

I said “love-hate” because Wudugast wrote that he has “a long standing love for the Adeptus Mechanicus, dating back to long before there was a range of models available for them,” but that until now he had “never painted a single model from the range,” and he found painting his first ranger an exercise in “frustration and irritation,” though he did much better sanity-wise with the second.  I’m glad because I’d very much like to see more Adeptus Mechanicus stuff from the mighty Wudugast!

What game doesn’t need more “hard-done-by civilians” to populate its burgeoning Necromunda hives?  Wudu is quite right to complain that with all of the xenos, cultists, gangs and such, no one is “here to do a day’s work.  They just seem to think that the corroded pipes, pools of toxic gunk and ominous piles of skulls just happen by magic.”  Complain no longer for here are some “Mechanics” produced by C-P Models ready to put in a hard day’s work.

Well, they used to be mechanics until Convert or Die’s chief, um, “converter” got his multifarious and (perhaps) charmingly misshaped paws on them.  He also used “heads from Anvil Industry and various Games Workshop gubbins.”  The spherical drone was “kitbashed entirely out of odds and ends” and almost ended back in the bits box junk pile until Wudugast decided his new workmen might make use of it.

Convert or Die Necromunda civilians three and drone

I wonder if that drone perhaps needs a candle?

Wudugast also wanted to experiment with “a new and easier way to paint orange.”  For these chaps he base coated with Jokaero Orange, followed by Gryph-Hound Orange Contrast, ending with a highlight of Jokaero Orange and then Fire Dragon Bright.  Looks pretty good to me.  Might have to try this recipe out.  Certainly sounds easy enough.

On a side note, I mentioned to Wudu that I liked the candles and he told me they came from the Cawdor kit.  Fancy!

Here are the original C-P Models mechanics in case you were wondering:

Convert or Die Mechanics models C-P Models

The think the guy on the left is pissed about his errant pile of skulls.

Head swaps, candles, sinister drone assistants and the like might not be ideal working conditions/fringe benefits, but at least they are better off than these four unfortunates below.  If you would like to see Wudugast’s completed forty poxwalker-strong mob (I manually counted them in the picture), with all of his various conversions, sometimes subtle but always delightful, you can find them here.

We continue our tour of Necromunda with Alex’s (of Leadballoony) D’onne ‘Mad D’onna’ Ultanti miniature he “originally intended to complete” a couple of years ago, again for his yearly Fembruary painting challenge.  Happily, Alex finally managed to gather his courage and complete the miniature for this little challenge.

Leadballoony D'onne Ultani front view

Forget the weaponry, the hair alone puts D’onne firmly into the elite category.

I suspect D’onne would be the sort of person our aforementioned mechanics would complain about, what with her tragic upbringing, her time in and out of various underhive gangs, and not having the inclination what with being on the run and all, to admire their cunning fashioned piles of skulls and working, not-leaking-too-badly plumbing. 

Given her penchant for the plasma pistol and table manners (one wonders if a fish fork is the correct utensil for taking out someone’s eye at a formal dinner … at least in polite society?) I imagine said mechanics would do well to keep their opinions firmly to themselves.  

Alex based his paint scheme for D’onne from the book, Survival Instinct, by Andy Chambers.  The cover art was done by Clint Langley.  He (Alex not Andy or Clint) talks about some of the challenges of painting the miniature, such as fishnets, and I have to agree that sounds hard.  Well done, Alex, for finally getting D’onne finished and not having to endure another year of her sending you threatening, faux Morse code-based messages from your bits box by cunningly revving her (nuclear powered?) chainsword, demanding you get her painted for Fembruary 2021.  Now you can have some other miniature threaten you instead!

Candore Et Labore Tree person bust ink sketch effect clip art

Eric of Candore Et Labore certainly was productive for the month of April, which heralded (besides finishing 26 models) the completion of Eric’s first (five months in the making) diorama.  Here we have a scene near the cliffs of Dover, very likely during the Battle of Britain.  Note that the decals on the German aircraft, painted in 1940 colors, represent the 109 flown by Luftwaffe ace, Feldwebel Heinz Bär.

Candore Et Labore Spitfire and Me 109 diorama

1/72 scale German Bf 109 E-3 and British Spitfire Mk I.a.

Some of the “many firsts” for Eric in his diorama is “modeling water using toilet paper, using an airbrush to paint a realistic model and camouflage and making smoke/fire from cotton balls.”  I think he did a great job and this dogfight alone would have been a good month’s work, in my estimation, but Eric was far from done yet.

From England we journey to a scratch-built patch of North Africa where Eric has emplaced a flak gun.  I like how this turned out, particularly the weathering on the gun shield.  The sandbags where a nice touch too, as well as the verisimilitude in locating the emplacement in what seems a tactically sound area.  The picture gives the sense that the area is a slight depression.  The ridge on the right provides good cover and concealment on that side and the Germans have placed some sand bags where they would do some good for the riflemen.  Perhaps they have a machine gun back there somewhere they could bring up if needed?

Candore Et Labore German flak gun diorama

This Flugabwehrkanone is from Tamiya’s “Siege of Tobruk” set in 1/48 scale.

Eric fired up his printer and completed some alien plants.  His idea was to paint them up fast with “wild colors,” and to that end Eric “used only craft store paints straight from the battle.”  (Note the guardsman in the bottom right picture put in for scale.)

Eric also printed out and painted a Necromunda loader and a “little critter” that reminds me of a Tarantula sentry gun with twin assault cannons.  (I think I have one with heavy bolters eternally lost somewhere in my pile of plastic.)  He also got an interesting bit of terrain done that looks like it could be some sort of turbine or field generator.

Finally, Eric painted two busts that he “had printed months ago.”  The plant person on the left is “baby Groot,” and the idea was to “put a small cactus in his head,” which is hollow like a planter, and present Baby Groot Cactus Head as a present for his wife’s birthday.  Alas, with the stores closed down he couldn’t make the cactus happen, but he did also paint up a plague doctor bust.  Nice!

Mark, of Man of Tin, inspired by a 1987 article by Stuart Asquith, decided to open up his blue box of drawers that has done good service by helping “preserve a small core of randomly painted and unpainted figures from my gaming in the 1980s throughout many house moves.”

He has taken advantage of his extra hobby time to finish a bunch of figures and units that have been sitting around for nearly 40 years.  Mark got a lot of work done and I’m sure there is much more space in his blue box to build up to another big painting project by 2060 or so!

Man of Tin Peter Laing 15mm ECW unit with white and gray flag

Peter Laing 15mm English Civil War pikemen complete at last.

In addition to the Blue Box Figures, Mark also had another box where he stored “random figures from job lots,” that he acquired in his quest for more Peter Laing figures.  Some of scrapped metal found new life as european “ImagiNations ‘Forgotten Minor States,'” such as the Volunteer Militia.  One wonders what the symbol on their flag is supposed to represent?

Man of Tin FMS unit Volunteer Militia of Thyer Brigadia

Volunteer Militia of Thyer Brigadia unit.

Some “Confederates, generic rebels or Revolutionary forces” made up from “unpainted scrap American Civil War type figures from various makers in mixed uniforms.”  Given its pedigree, it seems to me like this unit ought to get some sort of bonus in games when fielded as irregulars, militia, etc.

Man of Tin generic Confederates rebels revolutionary forces unit

“They have improvised themselves a dramatic Revolutionary flag.”

The cannon is “from the Napoleonic Risk board game served by a crew made from “broken figures.”

Man of Tin cannon and crew from the Napoleonic Risk game

Artillery support, perhaps, for our revolutionary types above?

Besides, revolutionaries, Mark also found (and patched up) pirate types a plenty in his magic Blue Box of Insurrection. I think he has enough miniatures between these guys and some of the others to put on a pretty respectable Treasure Island game.

Man of Tin 15mm Pirates with muskets and blunderbusses

Forgotten Minor States: 15mm pirates with muskets and blunderbusses.

Man of Tin 15mm Pirates with muskets and blunderbusses

More 15mm pirates (or brigands perhaps) with long pistols.

These chaps below in white shirts could fill many roles.  Guerrillas, colonists, sailors pressed into service by the pirates perhaps?

Man of Tin Guerillas or sailor looking types in white shirts with muskets or rifles

Guerillas or sailors with muskets or rifles (and a cannon!).

Mark also found a lot of 15mm “Tricorne figures with short muskets or carbines.”  He painted them to be “practical Redcoats roughing it in the forest wilds or along the cliffs and coast searching for Natives or Wreckers.”  Worthy opponents for the revolutionaries and pirates and as Mark points out could be useful for 18th Century Close Wars types of conflicts “in the forests of America.”

Mark completed a couple of dioramas, in addition to his newly refurbished 1980’s 15mm forces.  Here we have a “border watchtower in one of the forgotten minor states.”

Man of Tin Border Watchtower hex diorama

The hexes look good and a board of these would make for a very playable game.

Man of Tin Border Watchtower hex diorama view from back

This picture makes me want to play either a Command & Colors game or Muskets & Tomahawks.

Finally, Mark put together a “portable port” that was (in part) “inspired by finding a Murray King postcard of Cornish Wreckers” when he was “on a seaside trip a year or two ago.”

Man of Tin Portable Port

“Redcoats!  Smugglers!  Wreckers!”  Note the postcard in back.

The lighthouse and warehouses came from a “wooden buildings from Christmas” project.  The Martello tower has a swiveling cannon that Mark is very proud of.  He writes more about the these fortifications and how he made his here.  A spoiler:  it involves some “mini crumble puddings” containers.

Miko, of Dawn of the Lead, offers up a “mixed selection” of six miniatures he painted this month.  I think they are all very nicely painted and I like the background he used for them too.

The fellow below on the left is Black Cat Bases’s metal pirate surgeon, who provides many opportunities for the Carpenter to make a wooden limb.”  The pirate is Esmerelda II from Black Scorpion Miniatures.  Let’s hope a wooden limb isn’t in her future anytime soon!

Dawn of the Lead Barber Surgeon and Esmerelda

Like the glasses and the pirates’s hat & hair.

The monkey with the hat is another miniature from Black Scorpion.  (I think Mikko did a much better job of painting his than the one on the company website for what it is worth.)  Originally, as I pointed out in the comments to his post, I thought the miniature was a “dwarf anthro-donkey swashbuckler with an outrageously oversized hat,” but nope, it’s a monkey.

The monkey on the barrel was a “3d print from Depths of Savage Atoll.”  Speaking of barrels, Mikko did some more you can check out here.

Dawn of the Lead pair of monkeys

Another great hat.

The pirate on the left, with the raised sword, is a “custom Hero Forge piece” who Mikko named Smith of Bristol.  The inspiration for the name comes from a song by the Dubliners, and “tells the story of a daring pirate who goes around a-plunderin’ and a-robbin’ before finally being killed by a Spanish bullet.”  If you want to listen to the song, Mikko put a Youtube link in his blog post.

The last miniature is Tigl Uilenspiegel (or Till Owlglass), who “is a 16th (or possibly 15th or even earlier) century trickster figure,” and a rather odd fellow indeed.  Nice job with this one:  I really like the shading of the skin and the choice of colors for his clothes.

Dawn of the Lead Smith of Bristol and Till Owlglass

Finally, we wrap up our April painting challenge with my small contribution:  a bugbear and two poxwalkers, #18 and #19.  I liked how the flesh on “Somewhat Orange Poxwalker” came out so I might do something similar with the flesh on #20, which is the second of the great coat zombies.  (I saved the ones I wanted to paint the least until last.)

Bugbear and Poxwalker #18 and #19 for 12 Months of Hobby Painting Challenge at Painting in the Dark by Warbringer April 30 2020

Only one more poxwalker to go and I’ll have finally finished my Dark Imperium zombies.

Thank you very much again to everyone who participated in this, my second painting challenge.  If I left you out, please let me know and I’ll rectify the situation pronto.  If you haven’t seen Part One of this challenge, you can check it out here.

I apparently haven’t had enough of running painting challenges yet, so if you enjoyed this one and want more, check out the Sixty Day Miniatures of Magnitude Painting Challenge, which ends on July 3rd.

Take care, thank you for reading … and Paint On!

Fight On guy

 

Somewhat Orange Poxwalker #18 Finished

I finished Work-in-Progress (Nurgle Alert!) Poxwalker #18 the other day so MAGPPXWLKER-XVII has a special friend now.*  Despite my glacial pace, I’m currently in real danger of actually finishing up the Dark Imperium contagion-zombie mob.**  Whatever happens, I’ve completed a little “crap I already own” for the April painting challenge and I’m feeling pretty good about that!

Toad and I sort of like how this picture came out.

I started work on this poxwalker a long time ago and managed to drop it on the floor during one of my painting sessions.  This broke the tip off the large, overhead tentacle.  I set the miniature aside, possibly in disgust, and forgot about it for a year or so.  When I got back to work on it again, I had completely forgotten about the broken tentacle tip until I chanced to notice it once more.  As unpleasant surprises go, it was the gift that kept on giving!

I thought about maybe trying to whittle the offending appendage down a bit or repairing it with green stuff.  In the end I decided to rummage through my bits and see if I could make lemonade out of rotten lemons.  After several false tries (I really wish the hook had worked out) I ended up cutting a spear point-looking thing off the end of a chain bit from an old chaos space marine biker sprue and affixing it as you see here.

Hanging out, comparing mechanical arms probably, with #17.

I forget exactly how I painted the tentacles on #18, but I think I started out as I usually do with some Agrax Earthshade and maybe some Athonian Camoshade and/or thinned down Nuln Oil.  What I did do differently was after the washes I applied several layers of Skeletal Horde Contrast.  Then I went to do some tentacle highlight work, like I did on #17, when I realized that I didn’t really need to.  I could have but the washes in conjunction with the contrast paint brought the brown tentacles to a state that I was satisfied with for some random zombie.  As a final step, I used some Basilicanum Grey Contrast in the recesses between the tentacles.

Death Guard Symbol 125 wide

The lighter red ventral tentacles were painted with Blood Angels Red Contrast and then highlighted with various shades of red up through Wild Rider Red.  Then I tied them together with a mix of Blood for the Blood God, Lahmian Medium and old Baal Red I still have hanging around.

The darker ventral tentacle was painted with Flesh Tearers Red Contrast and then washed with Glossy Nuln Oil.  For the ventral area in general I used more Glossy Nuln Oil to impart some shine to the recessed areas and Minitaire Satin Coat where I wanted shine but didn’t want to add more color.

Might have to try Wudugast’s blue maggots on Poxwalker #20 perhaps.

I haven’t quite decided what else I want to finish this month.  I could go for broke and perhaps finish Poxwalker #19, though I also have a trio of Etsy bugbears with maces and shields that I quite favor too.  So many choices and the challenge deadline of May 3rd will be here before you know it.  I’ll have to decide soon.

Biohard clip art with circle around it 100 wide

* Perhaps a good, Death Guard name for the latest addition to my Indolent Forces might be Mechanical Arm that Works Kind of Crappily Somewhat Orange Poxwalker #18 or (MAWKCSOPXWLKR-XVIII)?  What it lacks in clarity I think it makes up for in pedantry.

** I put the Dark Imperium primaris space marines versus Death Guard boxed set on pre-order and picked it up the day it released in mid-2017.  I then immediately put together and started painting the poxwalkers, but got distracted by plaguebearers.  (I was assured by several people this can happen to anyone.)  I finished the first two poxwalkers in early September 2017.  Given that I’ve not only finished #18 but have actually started eyeing #19, there is a real chance I might actually finish the full mob of 20 within the next three years!  Not too shabby.

I’ll probably paint the six easy-to-build poxwalkers too at some point (I love the idea of a grenade flail!), but I wonder if I should even bother with the 150 or so more I have that people have given me over the years or sold to me for a nominal sum like, “Here’s 20 of these useless dudes I’ll never use; buy me a Coke or something?”

First Painting Challenge Dwarf Done!

Finished the first of four Etsy dwarves for my painting challenge a few days ago.  He is pictured here with my newest star of the moment lurking the ever-blurry background — the dreaded rust turtle from my last post.  The last day of the challenge is April 3rd so while I’ll be cutting it close getting my other three dwarves finished, I think I’ll make it.

I’d watch out if I were that dwarf.

I want all four of my dwarves to have different colored hair.  This guy got the same color as Roboute Guilliman, so my husband’s favorite primarch is in good company.  A pretty easy recipe and I liked how it turned out, compared to my dreadful and mercifully uncatalogued attempts some years ago with Averland Sunset.  I primed white, based with Zandri Dust, applied a Seraphim Sepia wash, and highlighted with Ushabti Bone.

The gold beard cap is an old five-step gold recipe.  Base with Balthasar Gold, layer with Gehenna’s Gold and then Auric Armor Gold.  Step four is Agrax Earthshade and finally a drybrush of Golden Griffon.

Is Turtle getting closer?  I can’t tell.

One thing I learned was that I like the Games Workshop contrast paints for edging and defining grooves.  I used Basilicanum Grey Contrast to pick out the design on his axe and line the inside edges on his shoulder pads, and Skeletal Horde Contrast in the grooves on his leather armbands.*  The armband effect is kind of subtle but I like how it looks in person.

I might try something similar but different and maybe fancier on the next dwarf, the ginger-haired one, who has the same type of armbands.  Maybe he’ll get magical, fire armbands or something.

“Wot’s that behind me?”

The base was just a simple dark gray and then wash with Nuln Oil, making sure I got the wash into the gaps in the stone pattern.  I put couple of smidgens of Astrogranite Debris onto the base, mainly because I have a pot of it kicking around, and then drybrushed with various lighter shades of gray with a little off-white at the end.

Wizard’s Familiar Cat hates Turtle getting all of the attention!

So much for painting challenge dwarves.  Sir John, if you happen to see this and are having your morning or high tea and crumpets, biscuits, cookies, etc. I’m giving you a Minor Class W (for work-in-progress) Nurgle Alert to put your cup down before proceeding further.

Nurgle Blood Bowl Icon 125

I have made a little progress on WIP Poxwalker #18 while I was putting the finishing touches on our dwarf friend.  I had completely forgotten, but about a year ago I dropped my poxwalker on the floor and broke off the tip of its largest dorsal tentacle.  I noticed (and hence remembered) last night when I was messing around with some contrast paints.

I rooted around in my Chaos bin until I found a likely looking pointy bit at the end of a plastic chain from a Chaos Biker sprue.  After a bit of cutting, filing, squinting, fighting with my bottle of Model Master Liquid Cement for Plastic Models, etc. I ended up with the result you see here.  Will be a mighty weapon to go along with the mechanical arm and its various diseases both offensive and defensive as well as those of an informative nature.**

Just hope I don’t drop the stupid thing again.

Time is flying by and I plan on getting my second dwarf completed soon.  He’s about 80% done so this shouldn’t be too hard.  That will leave only two of the little rotters and my painting challenge dwarves will be complete.  If all goes spectacularly well, I might even finish my poxwalker too.

The poxwalker gives me an (obvious) idea for an April painting challenge:  “Finish Something April.”  As the title suggests, finish up a model or group of models that you started work on but remains incomplete.  It can be something you just bought or a neglected model that has been gathering dust for untold centuries while the stars die and galaxies laugh.

Perhaps I could finally realize my dark dream of completing all 20 of my poxwalkers?

Dwarf Hammer Clip Art

* That Skeletal Horde paint will end up becoming distractingly ubiquitous in my painting efforts if I’m not careful.  I was going to try and make a joke that was a Skeletal Horde-based variation on the old saw about how if all you got is a hammer then every problem looks like a nail, but I couldn’t think of a good one.  Any suggestions?

** The poxwalkers will need the added tentacle-based weaponry because I’ve been told you need to pay points to bring your poxwalkers over their starting numbers now with the latest disturbances from the FAQ Warp.

I know we peers of Chaos Undivided are supposed to “embrace change” (yes, even when painting Nurgle stuff!) and venerate that ethereally tentacled technosorceror from olden days, Heraclitus of Ephesus, son of Bloson, etc. etc., but I would much rather it be change that benefits me and bonus flux points for it hurting my enemies in the bargain!   Iä! Iä! Thultzeentch fhtagn! Ph’nglui mglw’nfah Thultzeentch R’lyeh wgah’nagl fhtagn!

Poxwalker #17 (MAGAPPXWLKR-XVII)**

I decided at long last to finish up my poor, long-suffering friend, good old Work-in-Progress Poxwalker #17.  I guess it needs a new name now since this zombie is a WIP no longer.  How about Mechanical Arm Green and Purple Poxwalker #17 or MAGPPXWLKER-XVII to use something approaching a more official-sounding Death Guard designation?

Not sure why the silly cat felt a need to wander into the picture.

I didn’t tread into too much new territory with my latest minion, though the belly tentacles sort of went through various shades of purple and blue and purple again.  Oh, and of course I continued my usual practice of putting a ton of work into getting some small, fiddly, inconsequential detail just so, only to cover it with snot, grime and blood.  So there’s that.*

OTOH, toads and Nurgle go together like peanut butter and pus.  Yummy!

I continue to pick away at my four dwarves and hope to get them done by the Squaduary deadline of February 28th.  It is going to be a close thing and right now I put my chances at 50/50.  I am working on them every night though and even if I don’t make the deadline I’m going to continue to prioritize getting them done because I want them for my D&D games.

Speaking of painting challenges, I thought maybe I’d do one or two of my own this year because … why not?  I was thinking of something along the lines of next month being March Marauders and Might where the theme can be miniatures that are either singular, mighty heroes and monsters, such as a giant or a space marine hero/captain/whatever, or marauders in the sense of being despoilers, bandits or invaders.***

A very broad theme indeed, I think.  More on that next time if I decide to do it.  If so, I have a group of six Etsy bugbear-looking things with maces and halberds that seem pretty suitable, and if I’m feeling really squirrelly there is always the Abandoned Lonely Bloat Drone. that continues to languish away in my miniatures case.

Death Guard Symbol 125 wide

* In this case it was the little tri-lobed Death Guard amulet thingie depending from a cord on its loincloth.  I took great pains with getting the red and white bits just so.  I’m not sure if I should try again or not with the amulet on the next one (the yellow loincloth and black leather belt twin of this one) and then unsuccessfully try not to obscure my work again?  Knowing me, I probably will and regret it!  After all, a true mark of a good Chaos Noble is the fact that when “nothing else works, then a total pig-headed unwillingness to look facts in the face will see us through.”

“I am 100% certain I’ll finish those dwarves by the 28th!”

** Hi John. This is the mandatory, pseudo-official Nurgle warning so as not to spoil that period of time you block out each day (or several times each day?) for your tea and baked goods-related activities!

*** They can be good-guy invaders or bad-guy invaders.  It matters not so long as the blood and paint both continue to flow.

As Promised, Again With WIP Poxwalker #17

As promised, I offer a couple of pictures of where work-in-progress poxwalker #17 stands since the last time I turned my proverbial painting lens on this worthy zombie.*

PW#18 waits with undead patience in the fuzzy background.

I still have a bit more work to do, though I’m getting close to the end stages now.  The purple tentacles used to be blue, but I decided they were far too pretty in a wow-that-looks-like-it-would-look-great-on-a-blue-horror pretty and not poxwalker pretty so I hit them with some purple shade.  Upon reflection I might have hit them too hard and maybe I should have used some medium and/or tried blue shade or a blue and purple mix.  I still can, but I’m undecided.  I might leave them more or less as is and just highlight them a little.

Inertia and all….

After all, they are just a couple of belly tentacles and not really worth too much thought in the scheme of things.  Are there not whole regiments of guardsmen in the world who are still painfully bereft of the Grandfather’s multifarious blessings?

What kind of maggots to go with this time?**

I still have a few decisions to make such as what kind of maggots, and what kind of pox to go with this time.  Maybe Emerald Pox.  I’ve only done that with one other poxwalker, (one of the dreaded beach boy twins) so it isn’t overdone with this mob.***

I’m probably not going to rust up the mechanical arm too much.  Maybe a few Rhinox Hide patches and the like.****  I am thinking of busting out an old brush and the bottle of AK Interactive engine oil and experimenting with that.  I tried glossy Nuln Oil for a bit of fresh oil look, but that didn’t really work for me so far.

Next time I will post some pictures of the fully completed poxwalker #17, a work in progress no longer.  I’ll know it is done by my usual tried-and-true method, which is when my fiddling seems to make things no better and maybe even worse.  That is when I know it is time to stop with many things in life, miniatures and writing both.


“Promised” should be construed to mean a non-binding echo of a glimmer of a reflection upon said Humble Narratrix’s part to maybe put up some pictures of WIP-PW#17 if and when it is convenient to do so before becoming distracted by less important things.

**  It is a very good sign when you type “maggot” in the search box for your site and a whole bunch of pages come up!

***  I haven’t forgotten about my idea of having countless hordes of poxwalkers, plaguebearers, etc. and identifying each mob with a different disease.

****  Perhaps the mechnical arm was in good working order when PW#17 was gifted with the blessings of Nurgle rather than the usual state of affairs, which of course is that the rust and falling apart look is in fact a wonderful magic that makes the mechanism in question work at least as and probably better than when it was right off the forge world assembly line.

Death Guard Symbol 125 wide

Poxwalker-in-progress and more Wattpad writing

So I spiral out the long, sad task of painting my mob of twenty poxwalkers into late 2019.  I would say, “I’ll finish the lot before 2020!” but we all know that probably has as much truth in it as a short, sharp fit of sneezing meaning nothing but continued perfect health after putting in an eight hour shift driving around a bus full of sick people.*

Here we have Ole #17, who is one of my current works-in-progress.  I gave this poxwalker some attention this past weekend, sketching out the base colors on its belt and loin cloth as well as beginning a little experiment with purple tentacles.  I also put some paint on the Death Guard symbol.  Still a lot more work to go, as you can see, but it’s coming along.

Unfinished but only semi-forgotten!

So far as my Wattpad adventures go, here is what’s been going on there for me lately:

  • I’ve been sketching out the next section for the Gabby novel.  I’ll certainly post here when it goes live.
  • Another user, Microbytes, who puts out little anthologies of collected work on Wattpad, used a drabble I wrote in August, called “Survive to Swim” in their Micro-August Anthology.**
  • Microbytes struck again, this time notifying me that they are doing 30 days of writing prompts called “30 Days of Spooky Tales.”  I came to the party a bit late, but I am going to make an attempt to complete all 30 prompts and make a little Wattpad collection/book/whatever out of them.  Right now I am up to three done and collected under the dubious work-in-progress name of “Thirty Days of Darkness.”

For next time I am hoping for more progress on the aforementioned Ole Number Seventeen, and I might play around a bit with some Plaguebearer Flesh contrast paint I picked up last week.  I can always tell I haven’t been to the game store in a long time when I see a new staff member and she gives me the Welcome to the Store New Customer Speech!

Also plan to work on more of the Spooky Tales prompts and of course Gabby.  Hope everyone who managed to read this far has a good week.  May you make good progress on your varied projects, both mundane and multifarious!


* I was going to say “we all know that would probably be a lie” but I thought it best (for my own continued good relations with the Grandfather if for no other reason) to stick to a Nurgle-based (and rather familiar situation, to your Humble Bus-Driving Narratrix) rather than a Tzeentch-based figure of speech.

** A “drabble” is apparently a 100 word short story.  I didn’t know this until I stumbled upon this tidbit in Wattpad.  I found some interesting information on the subject over on Wikipedia.

Red Spiny Backed Poxwalker

Another poxwalker enters the painted ranks, this one being number sixteen of twenty.  A classic example of the Red or Eastern Spiny Backed Poxwalker as coined/pointed out by that Perspicacious Poxwalkerer and Taxonomist, Alexis West.  As she points out in the comments appearing with the post here, this worthy is the “rarer Eastern Spiny Poxwalker … [with its] reddish tones.”

The trend of yellow clothes/red skin continues.

I was originally going for something where the spines/horns/pointy bits were a bit more set off from the rest of the hide, color-wise, but decided that perhaps I was happy with how it turned out more or less.  I find that once they are done, poxwalkers sort of grow on me, and my energies turn toward the next experiment and it is best to close the book and let events take their unnatural course.  After all, what is another soulless minion in a horde of the damned, even if its horns are or aren’t heavily contrasted with the skin in a way satisfying to even the most discriminating warmaster with a eye for color?*

I might add some color to that tan on tan plant…

A funny thing about the yellow pants (and it somehow keeps happening with this mob) … I put quite a bit of effort into the pants and by the end I’m covering up all of my hard work with goop, gore and brown ink.  Then I resolve to not put so much work in to the next poxwalker’s yellow clothes and then I do!

… but probably not!

Another view of the formerly yellow pants.  I got particularly carried away here with the ink, blood, toner, sand, and who knows what else.  Oh well, it is all good though because the next time I paint one of the red/yellow poxwalkers I won’t put so much work into the clothes.  Did the weapon pretty much the same as before, though I went for a slightly darker effect with more black with a little brown ink as opposed to the converse, which is what I did on the other Spiny Back.  A pretty subtle difference, I think.

So I’m in the last month of my second MFA class.  I plan on getting another poxwalker done in the interregnum between the end of this class and the start of the next one.**  Also sent some stuff I recently wrote to a few magazines, as well as a poem I wrote over 20 years ago to the school magazine, which made the mistake of telling me that consider previously published work.


* One is of course aware that poxwalkers, strictly speaking are not ‘soulless.’  As stated in the heretical Lexicanum, “The jolly humour of Nurgle is such that they’ve remain cruelly conscious and aware of all that occurs with them, souls of victims trapped in their dead bodies and with a rictus grin they stagger out in search of living meat to feast on.”

Always good (for a Chaos God) to have a sense of humor, I guess, even (or perhaps especially?) at the expense of others.  Better than dour old Khorne, incomprehensible Tzeentch, and most especially the Dark Prince, who seems really great at first, sort of like getting to eat your favorite food and then you find out you are in hell and all you will be doing for eternity is eating your favorite food.  Makes Happy Grandfather seem pretty good by comparison.

** I was going to say “or maybe two!” but that would be sheer hubris.  Of course any good Chaos Lady would just go for it and say “It’s only hubris if you fail,” and upon failing execute any and all involved or who witnessed it, including any star systems where the populations may or may not have heard someone allude to it in a redacted transmission.  But who has time for that?  So I’ll just stick with the one.

Works Cited

Poxwalker.”  wh40k.lexicanum.com.  Lexicanum, 1 March 2018.  Web.  12 July 2019.

West, Alexis. A Taxonomic Discussion of Poxwalkers Common to the Fourteenth Legion After the Death of Pertinax up to the Ascension of Regalianus the Usurper: A Short Study. [REDACTED], 2018 CE